backtotop

Extrusion technology

From the water basin to the packaged product

The extrusion of plastics is our origin. Our machines accompany the entire value chain for the production of almost all extruded plastic products. We also offer a wide range of technologies for multi-component parts. And we are convinced that this efficient process still has a lot of potential. Winding, labeling, marking, transporting and packaging are just the beginning!

bild

Extrusion peripherals from the experts

Cutting

Ready-to-install profiles can be produced inline and offline with various modules. Cutting and punching modules are modular in design. Different length measuring systems round off the flexible, compact system.

Winding

We create solutions for winding deformation-sensitive profiles. Seals and similar profiles can be wound under tension control. One coil is wound by the swivel arm while the other is assembled. A variety of different coil sizes can be used.

Packing

We integrate different packaging types and methods into the production line. Whether customer-specific sorting or simple free-falling: We implement every requirement.

Pull off

For controlled feeding out of a machine, we offer various discharge units for uniform feeding to ensure dimensional accuracy and surface quality.

Pull off

For controlled feeding out of a machine, we offer various discharge units for uniform feeding to ensure dimensional accuracy and surface quality.

bild

Our model for standard profiles features a compact design with various belts in different sizes to accommodate different tensile forces and speeds.

Our segmented pulling system also ensures the smooth, distortion-free pulling of cables, hoses, pipes, and profiles. Depending on the specific design, belt widths of up to 200 mm and contact lengths of up to 2,000 mm are possible.

The spindle gripper is particularly well-suited for drawing pultruded profiles. Its high-performance clamping units, combined with the powerful spindle, ensure perfect drawing (hand-over-hand) of the pultruded profile.

MA Generation

Cutting

Ready-to-install profiles can be produced inline and offline with various modules. Cutting and punching modules are modular in design. Different length measuring systems round off the flexible, compact system. Vom einfachen Abtrennen bis hin zu individuellen Stanzungen durch das Aneinanderreihen mehrerer Maschinen ist mit der MA Generation alles denkbar. Eine Grundmaschine – viele unterschiedliche Möglichkeiten.

-> A machine that can be equipped with different tools to create a wide variety of cuts or markings; you can also build several in a row if you want to customize your setup. An extruder is usually positioned upstream; a laser can then be added downstream to create markings, all in a single inline process following the extruder.

bild

Here’s a piece about what makes the E Cut so special

Below is additional information about the MA E Cut

Hier steht was zum P Cut, der kann auch direkt die Teile mitzählen wie es aussieht

The key to quality, efficiency and safe transportation Precise winding of extruded plastic profiles

Winding extruded plastic profiles is a key step in the production process. We ensure that profiles, hoses or flexible strips are wound cleanly, with tension control and in a space-saving manner – for optimum material protection and fewer rejects. We adapt our modular system to the profile, material and production speed. For efficient processes, high product quality and flexible product changes.

bild

Our basic models of swing-arm winders differ in the way they work, the functions they support and the type of material they wrap, with the automated versions offering greater efficiency and additional protective functions.

The entry-level model works semi-automatically with manual operation of the bobbin change. An upgrade is the automatic bobbin change: Once the desired winding length has been reached, the winder automatically swivels over, separates the profile, places it on the empty bobbin and the winding process starts again.

For profiles that are particularly sensitive to deformation, such as doors, a cardboard interlayer can be used, which is automatically inserted during the winding process

Disc winders are ideal for flexible products such as hoses that need to be wound loosely and with little tension. The rotating disks lay the material down evenly in a spiral. This creates compact, dimensionally stable rings without the product being kinked or compressed.

Packing

We integrate different packaging types and methods into the production line. Whether customer-specific sorting or simple free-falling: We implement every requirement.

bild

Sliders are used to push the profiles into cartons to the right or left. Because the packaging aid can be adjusted up and down, it can be customized to accommodate various carton and profile sizes.

We also handle automatic packaging into cardboard boxes. This is done for high-volume production and high production speeds to increase line autonomy.

The swivel distributor is ideal for high-speed packaging of short profiles or small parts. It allows profiles to be fed into the carton in counted quantities.

Key data

OKE worldwide

icon
1,800

employees

icon
10

countries worldwide

icon
15

subsidiaries

icon
High equity ratio

and strong financial stability

icon
200

injection molding machines

icon
185

extrusion lines

icon
In-house

mechanical engineering

icon
Highest

process and products quality